IDT72T20128L10BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 208 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALTERNATIVE MEMORY WIDTH 10 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Access Time | 10 ns |
| Direction | Unidirectional |
| Organization | 256KX20 |
| Memory Width | 20 |
| Density | 5 Mb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Alternate Memory Width | 10 |
| Output Enable | YES |
| Height Seated (Max) | 1.97mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
IDT72T20128L10BB Overview
FIFO memory chip is contained in the BGA package.Mounting it Surface Mount is recommended.If the supply voltage is set to 2.5V , high efficiency can be achieved.The number of terminations in FIFO means is 208 .208 pins are the operation pins.In order to maximize efficiency, the supply voltage should be set to 2.5V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 2.375V V.A maximum voltage of 2.625V volts can be applied to FIFO memory.There are a total of 208 pins on this board.When the frequency is set to 100MHz it can maintain good accuracy.Additionally, this FIFO memory can be used to generate ALTERNATIVE MEMORY WIDTH 10 .
IDT72T20128L10BB Features
FIFOs category
IDT72T20128L10BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72T20128L10BB FIFOs Memory applications.
- Analog-to-digital converters
- Computer Systems
- Rate buffers
- Down-Hole Energy Drilling
- Battery Charger
- Queues for communication systems
- Multimedia
- Buses
- Network switching/routing
- Digital buffering
