IDT72T2098L4BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 208 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALTERNATIVE MEMORY WIDTH 10 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Access Time | 4 ns |
| Direction | Unidirectional |
| Organization | 32KX20 |
| Memory Width | 20 |
| Density | 640 kb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Alternate Memory Width | 10 |
| Output Enable | YES |
| Height Seated (Max) | 1.97mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72T2098L4BB Overview
BGA is the package in which FIFO memory chip is contained.Surface Mount is recommended as the mounting method.With a supply voltage of 2.5V volts, high efficiency is possible.A total of 208 terminations are contained within FIFO means.There are 208 pins on the operation pins.In order to maximize efficiency, the supply voltage should be set to 2.5V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 2.375V V.A maximum voltage of 2.625V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 208 pins.In the presence of a 250MHz frequency, it can maintain good accuracy.With the help of this FIFO memory, ALTERNATIVE MEMORY WIDTH 10 can also be generated.
IDT72T2098L4BB Features
FIFOs category
IDT72T2098L4BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72T2098L4BB FIFOs Memory applications.
- Network switching/routing
- Telecommunication
- Wireless
- Routers
- IP Radio
- Multi-stage synchronizer
- Tape controllers
- Digital buffering
- Thermal Management for DDR3 Memory Modules
- Video time base correction
