IDT72T2098L6-7BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 208 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALTERNATIVE MEMORY WIDTH 10 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Access Time | 3.8 ns |
| Direction | Unidirectional |
| Organization | 32KX20 |
| Memory Width | 20 |
| Density | 640 kb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Alternate Memory Width | 10 |
| Output Enable | YES |
| Cycle Time | 6.7 ns |
| Height Seated (Max) | 1.97mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72T2098L6-7BB Overview
You will find FIFO memory chip in the BGA package.The recommended mounting way is Surface Mount .Supply voltages of 2.5V are capable of achieving high efficiency.FIFO means contains 208 terminations.There are 208 pins for operation.The supply voltage should be set to 2.5V in order to achieve FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .This part has a memory type of OTHER FIFO .If the supply voltage is very low, such as 2.375V V, FIFO may be able to operate.A maximum voltage of 2.625V volts can be applied to FIFO memory.Approximately 208 pins are attached to it.It maintains good accuracy at a 150MHz frequency.This gadget can also generate ALTERNATIVE MEMORY WIDTH 10 .
IDT72T2098L6-7BB Features
FIFOs category
IDT72T2098L6-7BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72T2098L6-7BB FIFOs Memory applications.
- Multi-stage synchronizer
- Routers
- Temporary storage elements
- Product traceability
- Battery Charger
- Networking
- Communications
- Portable Information Devices
- Application that requires re-writable nonvolatile parameter memory
- One assembly
