IDT72T40118L6-7BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 208 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALTERNATIVE MEMORY WIDTH: 10 AND 20 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Access Time | 3.8 ns |
| Direction | Unidirectional |
| Organization | 128KX40 |
| Memory Width | 40 |
| Density | 5 Mb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 40b |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Cycle Time | 6.7 ns |
| Height Seated (Max) | 1.97mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72T40118L6-7BB Overview
You can find FIFO memory chip in package BGA .Mounting it Surface Mount is recommended.When the supply voltage is 2.5V there is the possibility of high efficiency.As a result of this, FIFO means contains 208 terminations.These are the 208 pins for operation.In order to maximize efficiency, the supply voltage should be set to 2.5V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained in FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at a very low supply voltage, such as 2.375V V.An input voltage of 2.625V V is the maximum that FIFO memory can handle.This FIFO memory IC is equipped with 208 pins in total.With a frequency of 150MHz , it maintains good accuracy.Using this gadget, ALTERNATIVE MEMORY WIDTH: 10 AND 20 can also be generated.
IDT72T40118L6-7BB Features
FIFOs category
IDT72T40118L6-7BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72T40118L6-7BB FIFOs Memory applications.
- Controlled baseline
- Computer networks
- SPD for DDR3 Memory Modules
- Data communications
- Cardiac Monitoring Device
- Desktop Computers
- Networking
- Disk Controllers
- SPI Bus Flash Memory Devices
- Character generators
