IDT72V36102L10PF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| JESD-30 Code | S-PQFP-G120 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Access Time | 10 ns |
| Organization | 64KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 2359296 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V36102L10PF8 Overview
LQFP is the package in which FIFO memory chip is contained.This FIFO memory chip is packaged as a Tape & Reel (TR) .The recommended mounting way is Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 120 terminations.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFOs contains this gadget in its entirety.A BI-DIRECTIONAL FIFO memory type IC is used in the part.The FIFO memory IC is equipped with a total of 120 pins.Components normally possess 3.3V power supplies.Additionally, MAIL BOX BYPASS REGISTER can be generated with this FIFO memory.In this case, the FIFO memory IC's maximum supply voltage is set to 3.45V .For normal operation, keep the supply voltage (Vsup) above 3.15V .The clock of the FIFO memory IC runs at 100MHz frequency.
IDT72V36102L10PF8 Features
FIFOs category
Clock frequency of 100MHz
IDT72V36102L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) IDT72V36102L10PF8 FIFOs Memory applications.
- Notebook
- Network switching/routing
- Thermal Management for DDR3 Memory Modules
- General Data Collection Applications at Low-Temperatures
- Test Equipment
- SPI Bus Flash Memory Devices
- Networking
- Multi-stage synchronizer
- Switches
- Routers
