IDT72V36103L10PF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| JESD-30 Code | R-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Access Time | 10 ns |
| Organization | 64KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 2359296 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V36103L10PF8 Overview
LQFP is the package in which FIFO memory chip is contained.In the shape of a Tape & Reel (TR) , it's packaged.Mounting it in Surface Mount is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.A total of 128 terminations are contained within FIFO means.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.FIFOs contains this gadget in its entirety.ICs of type OTHER FIFO are used in the FIFO memory chip.The FIFO memory IC has a total of 128 pins.It is normal for a component to be equipped with 3.3V power supplies.The FIFO memory IC's maximum supply voltage is set to 3.45V .Ideally, the supply voltage (Vsup) should stay above 3.15V .There is 100MHz frequency set for the clock of the FIFO memory IC.
IDT72V36103L10PF8 Features
FIFOs category
Clock frequency of 100MHz
IDT72V36103L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) IDT72V36103L10PF8 FIFOs Memory applications.
- Tape controllers
- Video time base correction
- Controlled baseline
- Alarm System
- Down-Hole Energy Drilling
- Microprogramming
- Computers
- Communications Systems
- Rate buffers
- Telecommunication
