IDT72V36104L10PF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| JESD-30 Code | R-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Access Time | 10 ns |
| Organization | 64KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 2359296 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V36104L10PF8 Overview
FIFO memory chip is contained in the LQFP package.In terms of packaging, it comes in Tape & Reel (TR) cases.A Surface Mount mounting method is recommended.High efficiency is possible with a supply voltage of 3.3V .A total of 128 terminations can be found in FIFO means.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.This gadget is self-contained in?FIFOs .The IC of the part is BI-DIRECTIONAL FIFO memory type.The FIFO memory IC is equipped with a total of 128 pins.The component normally owns 3.3V power supplies.Additionally, MAILBOX BYPASS REGISTER can be generated with this FIFO memory.The FIFO memory IC's maximum supply voltage is set to 3.45V .Ideally, the supply voltage (Vsup) should stay above 3.15V .This FIFO memory IC operates at a frequency of 100MHz .
IDT72V36104L10PF8 Features
FIFOs category
Clock frequency of 100MHz
IDT72V36104L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) IDT72V36104L10PF8 FIFOs Memory applications.
- Firmware loaders
- Buses
- Emulators
- IP Radio
- Multi-stage synchronizer
- Extended product life cycle
- Video time base correction
- Consumer Systems
- Queues for communication systems
- PC peripheral
