IDT72V36106L15PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| JESD-30 Code | R-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 66.7MHz |
| Access Time | 15 ns |
| Organization | 64KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 2359296 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
IDT72V36106L15PF Overview
LQFP is a package that contains FIFO memory chip.Mounting it in Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .A total of 128 terminations can be found in FIFO means.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.It is contained within FIFOs .There is a memory type BI-DIRECTIONAL FIFO in the IC of this part.Approximately 128 pins are attached to it.Components normally possess 3.3V power supplies.A FIFO memory IC's maximum supply voltage of 3.45V is set for Vsup.A voltage above 3.15V is necessary for normal operation.A clock on the FIFO memory IC runs at a frequency of 66.7MHz .
IDT72V36106L15PF Features
FIFOs category
Clock frequency of 66.7MHz
IDT72V36106L15PF Applications
There are a lot of Integrated Device Technology (IDT) IDT72V36106L15PF FIFOs Memory applications.
- Magnetic memories
- Microprogramming
- Temporary storage elements
- Controlled baseline
- HDD
- Computer networks
- Data-acquisition systems
- General Data Collection Applications at Low-Temperatures
- Test Equipment
- Programmable Logic Controller
