IDT72V36106L15PF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| JESD-30 Code | R-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 66.7MHz |
| Access Time | 15 ns |
| Organization | 64KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 2359296 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V36106L15PF8 Overview
You will find FIFO memory chip in the LQFP package.You'll find it packaged in the shape of a Tape & Reel (TR) .The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.The number of terminations in FIFO means is 128 .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget in FIFOs is self-contained.The IC of the part is of the type BI-DIRECTIONAL FIFO .As a result, it contains a total of 128 pins.The component normally owns 3.3V power supplies.A FIFO memory IC's maximum supply voltage of 3.45V is set for Vsup.Keeping the supply voltage (Vsup) above 3.15V is essential for normal operation.There is 66.7MHz frequency set for the clock of the FIFO memory IC.
IDT72V36106L15PF8 Features
FIFOs category
Clock frequency of 66.7MHz
IDT72V36106L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) IDT72V36106L15PF8 FIFOs Memory applications.
- Data-acquisition systems
- Measurement Equipment
- PC peripheral
- Buses
- Video
- Product traceability
- SPI Bus Flash Memory Devices
- Disk Controllers
- SPI Bus Flash Memory Device
- Event Recorder
