IDT72V3682L15PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| JESD-30 Code | S-PQFP-G120 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 66.7MHz |
| Access Time | 15 ns |
| Organization | 16KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V3682L15PF Overview
LQFP is a package that contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.A supply voltage of 3.3V allows for high efficiency.A total of 120 terminations can be found in FIFO means.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .The IC of the part is of the type BI-DIRECTIONAL FIFO .The FIFO memory IC has a total of 120 pins.There are normally 3.3V power supplies attached to the component.This gadget can also generate MAIL BOX BYPASS REGISTER .Vsup is set to 3.45V (FIFO memory IC's maximum supply voltage).To ensure normal operation, the supply voltage should be greater than 3.15V (Vsup).A clock running at frequency 66.7MHz is used by the FIFO memory IC.
IDT72V3682L15PF Features
FIFOs category
Clock frequency of 66.7MHz
IDT72V3682L15PF Applications
There are a lot of Integrated Device Technology (IDT) IDT72V3682L15PF FIFOs Memory applications.
- Emulators
- Transistors
- Laser Receiver System
- Computers
- Extended product life cycle
- Industrial Systems
- Networking
- Multimedia
- Measurement Equipment
- Portable Information Devices
