IDT72V3683L10PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Published | 2008 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| JESD-30 Code | R-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Access Time | 10 ns |
| Organization | 16KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V3683L10PF Overview
FIFO memory chip is contained in the LQFP package.Mounting it in Surface Mount is recommended.An input voltage of 3.3V results in high efficiency.FIFO means contains 128 terminations.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.This part has a memory type of OTHER FIFO .The FIFO memory IC is equipped with a total of 128 pins.Normally, 3.3V power supplies are owned by the component.The FIFO memory IC's maximum supply voltage is set to 3.45V .To ensure normal operation, make sure the supply voltage (Vsup) is above 3.15V .The FIFO memory IC is controlled by a clock with a frequency of 100MHz .
IDT72V3683L10PF Features
FIFOs category
Clock frequency of 100MHz
IDT72V3683L10PF Applications
There are a lot of Integrated Device Technology (IDT) IDT72V3683L10PF FIFOs Memory applications.
- High-speed disk
- Product traceability
- Thermal Management for DDR3 Memory Modules
- GPS Offender Tracking
- Industrial Systems
- Firmware loaders
- General Data Collection Applications at Extreme High-Temperatures
- Optical memories
- Emulators
- Down-Hole Energy Drilling
