IDT72V3693L10PF
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| JESD-30 Code | R-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Access Time | 10 ns |
| Organization | 32KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 1179648 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Published | 2008 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
IDT72V3693L10PF Overview
FIFO memory chip can be found in the LQFP package.The recommended mounting method for this FIFO products is Surface Mount .An input voltage of 3.3V results in high efficiency.As a result of this, FIFO means contains 128 terminations.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.It consists of a total of 128 pins.In normal circumstances, the component has 3.3V power supplies.There is a FIFO memory IC's maximum supply voltage of 3.45V (Vsup).To ensure normal operation, make sure the supply voltage (Vsup) is above 3.15V .The FIFO memory IC runs at a frequency of 100MHz .
IDT72V3693L10PF Features
FIFOs category
Clock frequency of 100MHz
IDT72V3693L10PF Applications
There are a lot of Integrated Device Technology (IDT) IDT72V3693L10PF FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Cameras
- PC peripheral
- Firmware loaders
- Portable Information Devices
- Routers
- Multi-stage synchronizer
- Optical memories
- Telecommunication
- High-speed disk
