IDT72V3693L10PF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| JESD-30 Code | R-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Access Time | 10 ns |
| Organization | 32KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 1179648 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V3693L10PF8 Overview
FIFO memory chip can be found in the LQFP package.Tape & Reel (TR) case is used for packaging.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 3.3V , high efficiency is possible.The number of terminations in FIFO means is 128 .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There are a total of 128 pins on this board.There are normally 3.3V power supplies attached to the component.A FIFO memory IC's maximum supply voltage of 3.45V is set for Vsup.Maintain the supply voltage (Vsup) above 3.15V for normal operation.There is 100MHz frequency set for the clock of the FIFO memory IC.
IDT72V3693L10PF8 Features
FIFOs category
Clock frequency of 100MHz
IDT72V3693L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) IDT72V3693L10PF8 FIFOs Memory applications.
- Controlled baseline
- TVs
- Product traceability
- Game Consoles
- Game Controller
- Notebook
- GPS Offender Tracking
- SPI Bus Flash Memory Device
- Programmable Logic Controller
- Down-Hole Energy Drilling
