IDT72V72100L10BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 256 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Access Time | 10 ns |
| Direction | Unidirectional |
| Organization | 64KX72 |
| Memory Width | 72 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 72b |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V72100L10BB Overview
FIFO memory chip is contained in the BGA package.Mounting it in the Surface Mount way is recommended.When the supply voltage is 3.3V , high efficiency is possible.The number of terminations in FIFO means is 256 .As far as the operation pins are concerned, they are 256 pins.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.The FIFO memory IC is equipped with a total of 256 pins.In the presence of a 100MHz frequency, it can maintain good accuracy.Using this gadget, RETRANSMIT can also be generated.
IDT72V72100L10BB Features
FIFOs category
IDT72V72100L10BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72V72100L10BB FIFOs Memory applications.
- PC peripheral
- Microprogramming
- Industrial Systems
- Event Recorder
- Test site
- Analog-to-digital converters
- Signal processing
- Cardiac Monitoring Device
- Medical Monitoring Device
- Smart Meter
