IDT72V7230L10BB
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Access Time | 10 ns |
| Direction | Unidirectional |
| Organization | 512X72 |
| Memory Width | 72 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 72b |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 256 |
| Published | 2005 |
| JESD-609 Code | e0 |
IDT72V7230L10BB Overview
FIFO memory chip can be found in the BGA package.It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 3.3V results in high efficiency.A total of 256 terminations can be found in FIFO means.The operation pins are 256 pins.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Low supply voltages, such as 3.15V V, may be required for operation.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.Approximately 256 pins are attached to it.When the frequency is set to 100MHz it can maintain good accuracy.It is also possible to generate RETRANSMIT with the use of this FIFO memory.
IDT72V7230L10BB Features
FIFOs category
IDT72V7230L10BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72V7230L10BB FIFOs Memory applications.
- Consumer
- High-speed disk
- Telecommunication
- Desktop Computers
- Smart Meter
- Computer Systems
- Microprogramming
- Data-acquisition systems
- Signal processing
- Transistors
