IDT72V7240L10BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 256 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Supply Current-Max | 0.075mA |
| Access Time | 10 ns |
| Organization | 1KX72 |
| Memory Width | 72 |
| Standby Current-Max | 0.015A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V7240L10BB Overview
Mounting it in the Surface Mount way is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains a total of 256 terminations.256 pin is used for operation.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.Currently, it has 256 pins.A component normally has 3.3V power supplies attached to it.It is also possible to generate RETRANSMIT by using this FIFO memory.Voltage FIFO memory IC's maximum is set to 3.45V .To ensure normal operation, make sure the supply voltage (Vsup) is above 3.15V .The clock of the FIFO memory IC runs at 100MHz frequency.
IDT72V7240L10BB Features
FIFOs category
Clock frequency of 100MHz
IDT72V7240L10BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72V7240L10BB FIFOs Memory applications.
- Laser Receiver System
- Event Recorder
- Look-up Tables
- Tape controllers
- Multi-stage synchronizer
- Buses
- Wireless
- Portable Information Devices
- Cardiac Monitoring Device
- General Data Collection Applications at Extreme High-Temperatures
