IDT72V7250L10BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 256 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Supply Current-Max | 0.075mA |
| Access Time | 10 ns |
| Organization | 2KX72 |
| Memory Width | 72 |
| Standby Current-Max | 0.015A |
| Memory Density | 147456 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V7250L10BB Overview
Surface Mount is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 3.3V .In FIFO means, there are 256 terminations.Operation pins are 256 .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is of the type OTHER FIFO .As a result, it contains a total of 256 pins.It is normal for a component to be equipped with 3.3V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.Vsup is set to 3.45V (FIFO memory IC's maximum supply voltage).In order to ensure normal operation, the supply voltage (Vsup) should be kept above 3.15V .This FIFO memory IC has a clock frequency of 100MHz .
IDT72V7250L10BB Features
FIFOs category
Clock frequency of 100MHz
IDT72V7250L10BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72V7250L10BB FIFOs Memory applications.
- Portable Information Devices
- Signal processing
- Video
- Cameras
- Smart Meter
- Test Equipment
- Thermal Management for DDR3 Memory Modules
- PC peripheral
- Portable Information Devices
- IP Radio
