IDT72V7250L15BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 256 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 66.7MHz |
| Supply Current-Max | 0.075mA |
| Access Time | 15 ns |
| Organization | 2KX72 |
| Memory Width | 72 |
| Standby Current-Max | 0.015A |
| Memory Density | 147456 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V7250L15BB Overview
A Surface Mount mounting method is recommended.When the supply voltage is 3.3V , high efficiency is possible.FIFO consists of 256 terminations, which indicates that FIFO means is empty.In the case of the operation pins, they are 256 pins.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget in FIFOs is self-contained.It has a OTHER FIFO memory type IC.There are a total of 256 pins on this board.A component normally has 3.3V power supplies attached to it.Additionally, RETRANSMIT can be generated with this FIFO memory.FIFO memory IC's maximum supply voltage is set to 3.45V .Maintain the supply voltage (Vsup) above 3.15V for normal operation.The clock of the FIFO memory IC runs at 66.7MHz frequency.
IDT72V7250L15BB Features
FIFOs category
Clock frequency of 66.7MHz
IDT72V7250L15BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72V7250L15BB FIFOs Memory applications.
- PC peripheral
- Game Controller
- Thermal Management for DDR3 Memory Modules
- Networking
- Test site
- Down-Hole Energy Drilling
- Battery Charger
- Switches
- Magnetic memories
- High-speed graphics pixel buffer
