IDT72V7260L10BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 256 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Supply Current-Max | 0.075mA |
| Access Time | 10 ns |
| Organization | 4KX72 |
| Memory Width | 72 |
| Standby Current-Max | 0.015A |
| Memory Density | 294912 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V7260L10BB Overview
Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 256 terminations.As far as the operation pins are concerned, they are 256 pins.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.The FIFO memory IC is equipped with a total of 256 pins.There are normally 3.3V power supplies attached to the component.It is also possible to generate RETRANSMIT using this FIFO memory.The FIFO memory IC's maximum supply voltage is set to 3.45V .As a general rule, keep the supply voltage (Vsup) above 3.15V in order to ensure normal operation.A clock on the FIFO memory IC runs at a frequency of 100MHz .
IDT72V7260L10BB Features
FIFOs category
Clock frequency of 100MHz
IDT72V7260L10BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72V7260L10BB FIFOs Memory applications.
- SPI Bus Flash Memory Devices
- Computer Systems
- Data-acquisition systems
- Routers
- Multimedia
- General Data Collection Applications at Low-Temperatures
- Network switching/routing
- HDD
- Extended product-change notification
- Consumer Systems
