IDT72V7270L10BB
| Parameters | |
|---|---|
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Supply Current-Max | 0.075mA |
| Access Time | 10 ns |
| Organization | 8KX72 |
| Memory Width | 72 |
| Standby Current-Max | 0.015A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Number of Pins | 256 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
IDT72V7270L10BB Overview
It is recommended that memory IC be mounted in the Surface Mount direction.With a supply voltage of 3.3V volts, high efficiency is possible.256 terminations are contained in FIFO means.There are 256 pins on the operation pins.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .There are a total of 256 pins on this board.In normal circumstances, the component has 3.3V power supplies.The gadget can also generate a value of RETRANSMIT .A FIFO memory IC's maximum supply voltage of 3.45V is set for Vsup.A voltage above 3.15V is necessary for normal operation.A clock on the FIFO memory IC runs at a frequency of 100MHz .
IDT72V7270L10BB Features
FIFOs category
Clock frequency of 100MHz
IDT72V7270L10BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72V7270L10BB FIFOs Memory applications.
- Digital buffering
- Laser Receiver System
- Video
- Portable Information Devices
- Temporary storage elements
- Queues for communication systems
- Alarm System
- Cardiac Monitoring Device
- Address mapping
- Emulators
