IDT72V7280L10BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 256 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Access Time | 10 ns |
| Direction | Unidirectional |
| Organization | 16KX72 |
| Memory Width | 72 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 72b |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V7280L10BB Overview
You can find FIFO memory chip in package BGA .It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.A total of 256 terminations can be found in FIFO means.There are 256 pins on the operation pins.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .The IC of the part is OTHER FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.The FIFO memory IC is equipped with a total of 256 pins.It maintains good accuracy at a 100MHz frequency.This gadget can also be used to generate RETRANSMIT .
IDT72V7280L10BB Features
FIFOs category
IDT72V7280L10BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72V7280L10BB FIFOs Memory applications.
- Network switching/routing
- A/D output buffers
- SPI Bus Flash Memory Devices
- Look-up Tables
- High-speed graphics pixel buffer
- Cameras
- Test site
- Communications Systems
- Fabrication Site
- Digital buffering
