IDT72V7290L10BB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 256 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Supply Current-Max | 0.075mA |
| Access Time | 10 ns |
| Organization | 32KX72 |
| Memory Width | 72 |
| Standby Current-Max | 0.015A |
| Memory Density | 2359296 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V7290L10BB Overview
Surface Mount is memory IC's recommended mounting method.When the supply voltage is 3.3V , high efficiency is possible.I found that it has 256 terminations in FIFO means.The operation pins are 256 pins.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget in FIFOs is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.Approximately 256 pins are attached to it.Normally, the component owns 3.3V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.A FIFO memory IC's maximum supply voltage of 3.45V is set for Vsup.Keep the supply voltage (Vsup) above 3.15V for normal operation.In this FIFO memory IC, the clock runs at frequency 100MHz .
IDT72V7290L10BB Features
FIFOs category
Clock frequency of 100MHz
IDT72V7290L10BB Applications
There are a lot of Integrated Device Technology (IDT) IDT72V7290L10BB FIFOs Memory applications.
- Communications Systems
- Cameras
- Switches
- Data communications
- Digital buffering
- Wireless
- Transistors
- Test site
- Multimedia
- Analog-to-digital converters
