IDT74ALVCH16721PAG8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 56 |
| Packaging | Tape and Reel |
| Published | 2009 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH CLOCK ENABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 20 |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | AND |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
IDT74ALVCH16721PAG8 Overview
The item is packaged in TFSOPcases. D flip flop is included in the Tape and Reelpackage. A total of 1 elements are present. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 3.3V provides power to the D latch. It belongs to the family of electronic devices known as ALVC/VCX/A. There is an electronic part that is mounted in the way of Surface Mount. The 56pins are designed into the board. It has a clock edge trigger type of Positive Edge. Flip flops designed with 20bits are used in this part. The flip flop has 2ports embedded within it. Furthermore, it has WITH CLOCK ENABLEas a characteristic. There is 24mA output current at the high level. It is set to 24mAfor the low level output current. Temperatures below 85°Care ideal for operating. Operating temperatures should be above -40°C. Normally, it operates with a voltage of 2.3VV as its minimum supply voltage. It supports the maximal supply voltage of 3.6V. This frequency can be achieved 150MHz. The logic IC it adopts is BUS DRIVER. It is equipped with 1 Functions . The D latch is equipped with 56 pins.
IDT74ALVCH16721PAG8 Features
Tape and Reel package
56 pins
20 Bits
1 Functions
56 pin count
IDT74ALVCH16721PAG8 Applications
There are a lot of Integrated Device Technology (IDT) IDT74ALVCH16721PAG8 Flip Flops applications.
- Individual Asynchronous Resets
- Frequency Dividers
- Reduced system switching noise
- Clock pulse
- Load Control
- Set-reset capability
- Communications
- Automotive
- Registers
- Pattern generators
