IDT74CBTLV3126QG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Number of Terminations | 16 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 10μA |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Height Seated (Max) | 1.7272mm |
| RoHS Status | RoHS Compliant |
IDT74CBTLV3126QG Overview
Digital switch is provided in the QSOP for the purpose of saving board space.It is packaged according to the Rail/Tube method.Among its basic features are 16 terminations.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch contains 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.This multiplexer ic is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.In the signal multiplexer, there are 4 bits available.Without any external influences, it consumes 10μA current of multiplexer ic at all times.A resistance of 2 governs its operation.The maximum temperature for this signal switch is 85°C.A temperature of the multiplexer of -40°C should be maintained for minimal operation.The signal switches is specified to operate at the maximum supply voltage of 3.6V in compliance with the applicable device specification.Typical device specifications specify a voltage supply of 2.3V for the digital swith.It contains 4 elements in mux switch configuration.In terms of logic ICs, it uses BUS DRIVER.
IDT74CBTLV3126QG Features
Supplied in the QSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
IDT74CBTLV3126QG Applications
There are a lot of Integrated Device Technology (IDT) IDT74CBTLV3126QG Signal Switches / Multiplexers / Decoders applications.
- Relay
- Make full adder
- Telephone network
- Logic gates for other digital devices
- Data collection system
- Transmission from the computer system of a satellite
- GLAN
- Communication system
- Logic circuits
- Data-routing applications
