IDT74FCT16500ATPVG8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Family | FCT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 5.1 ns |
| Trigger Type | NEGATIVE EDGE |
| High Level Output Current | 64mA |
| Propagation Delay (tpd) | 5.6 ns |
| Low Level Output Current | 32mA |
| Control Type | INDEPENDENT CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 2.794mm |
| Length | 18.415mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
IDT74FCT16500ATPVG8 Overview
A copy of it is embedded in the package SSOP. Packaged in the manner of Tape & Reel (TR). In 56 terminations, the transmission line is terminated with a device matching its characteristic impedance. In order to maintain normal operation of the device, the supply voltage should remain above 5V. There are a total of 96 pins on this device. The electronic part was designed using 18 Bits. It is possible to terminate a transmission line with a device that matches the line's characteristic impedance, known as 2 terminations. It is mounted in the way of Surface Mount so that this electronic part can be seen. A 56-pin is used in this design. The device belongs to the FCT family of electronic devices. Upon reaching 5.5V, the supply voltage (Vsup) reaches its maximum value. It is recommended that the supply voltage (Vsup) be greater than 4.5V. Powered by 5V batteries, it operates on a 12V system. NEGATIVE EDGE is the trigger configured with it. This device is well suited for TAPE AND REEL based on its reliable performance. In addition to this, WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION is another characteristic of it. A high level output current is defined as 64mA. As far as the operating temperature is concerned, it should be higher than -40°C. There should be a lower operating temperature than 85°C.
IDT74FCT16500ATPVG8 Features
SSOP package
56 pin count
56 pins
5V power supplies
IDT74FCT16500ATPVG8 Applications
There are a lot of Integrated Device Technology (IDT) IDT74FCT16500ATPVG8 Universal Bus Functions applications.
- Embedded system
- Electric car
- Disk read-write IC
- Electric grinding wheel
- Troubleshooting & Judgment
- Small and medium distributed photovoltaic power generation system
- Agriculture and light complementary power station
- Fax machine
- Mountain power station
- Fan
