IDT74FCT257ATSOG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer/Demultiplexers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Family | FCT |
| Number of Inputs | 2 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER |
| Max I(ol) | 0.048 A |
| Prop. Delay@Nom-Sup | 5 ns |
| High Level Output Current | 48mA |
| Propagation Delay (tpd) | 5 ns |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
IDT74FCT257ATSOG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the SOIC.It is designed with 16 terminations as part of its basic configuration.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 16 component pins.It employs GULL WING as the point at which conductors come to an end.Single is used as its supply type.This unit is mounted in the way of Surface Mount.The FCT family includes the logic switch.Keeping Vsup at 4.75V will prevent some unwanted failures.Avoid unnecessary failures by keeping Vsup at 5.25V.mux switch's normal operation requires the power supply of 5V.There are 1 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as part number Multiplexer/Demultiplexers.In this multiplexer, there is a total of 2 inputs.85°C is an acceptable maximum temperature for this signal switch.Ideally, the temperature of the multiplexer should not exceed -40°C.For its logic, IC MULTIPLEXER is used.
IDT74FCT257ATSOG Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
MULTIPLEXER as the logic IC
IDT74FCT257ATSOG Applications
There are a lot of Integrated Device Technology (IDT) IDT74FCT257ATSOG Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Automation system
- Microprocessor instruction decoding
- Data distribution
- Make half adder
- High-performance memory-decoding applications
- Implementing boolean functions with multiple variables
- Seven segment displays
- Logic gates for other digital devices
- Enabling block of memory depending on address in memory chips
