Parameters |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
48 |
Packaging |
Tape and Reel |
Published |
2006 |
JESD-609 Code |
e3 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
48 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Bus Driver/Transceivers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
48 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Number of Ports |
2 |
Number of Bits |
16 |
Propagation Delay |
5.6 ns |
Quiescent Current |
3μA |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Independent Circuits |
4 |
Height Seated (Max) |
1.2mm |
Length |
12.5mm |
Width |
6.1mm |
RoHS Status |
RoHS Compliant |
IDT74FST163244PAG8 Overview
In order to conserve board space, digital switch is included in the TSSOP.Tape and Reel represents its packaging.As part of its basic configuration, 48 terminations are designed as a part of it.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 48 can be found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.There is a supply type of Single employed as part of this supply.A configuration of 48 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 16 bits.It is provided that 5V has a power supply in order to function normally.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Not being affected by the external factors, consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 2.At 85°C, the maximum operating temperature of this signal switch is acceptable.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.Based on the device specifications, the signal switches is designed to operate at 5.5V maximum supply voltage.Typical device specifications specify a voltage supply of 4.5V for the digital swith.For its logic, IC BUS DRIVER is used.
IDT74FST163244PAG8 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
IDT74FST163244PAG8 Applications
There are a lot of Integrated Device Technology (IDT) IDT74FST163244PAG8 Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- Implementing boolean functions with multiple variables
- RF-based home automation system
- Make full adder
- Small scale TV wall
- Logic gates for other digital devices
- Data bus control
- Steel plants
- Data-routing applications
- Enabling different functions units in microprocessor instruction decoding