IDT74LVCC3245APGG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Packaging | Rail/Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PORT B OPERATES FROM 3V TO 5.5V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Voltage |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 14.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | 3V & 3/5V |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
IDT74LVCC3245APGG Overview
Package TSSOP includes it.The package is in the form of Rail/Tube.Level translators uses Voltage as level translatorss output configuration.When it comes to terminating a transmission line, there are 24 terminations.A supply voltage of 2.5V powers it.The pin count of this device is 24.The board has 24 pins.Level translators is designed wLevel translatorsh 8 bLevel translatorss.The supply voltage is limited to 5.5V.In order for the machine to operate, the supply voltage must be 2.3V.The mount method is Surface Mount.Level translators is 1 channels.As part of Bus Driver/Transceivers, this part is included.There is BUS TRANSCEIVER logic IC in it.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.This electronic device belongs to the family of LVC/LCX/Z.Level translators consumes 80μA of quiescent current wLevel translatorshout being affected by outside factors.A power supply of 3.35V is used to operate this machine.There are also characteristics of PORT B OPERATES FROM 3V TO 5.5V SUPPLY associated with it.Temperatures above -40°C should be used.Ideally, the temperature should not be higher than 85°C.
IDT74LVCC3245APGG Features
TSSOP package
24 pin count
24 pins
3.35V power supplies
IDT74LVCC3245APGG Applications
There are a lot of Integrated Device Technology (IDT) IDT74LVCC3245APGG voltage translators & level shifters applications.
- General purpose I/O level shifting
- Available in Military (-55°C to 125°C)
- Eliminate Slow or Noisy Input Signals
- Industrial
- Motor Drives
- Products With Many I
- Automotive infotainment
- Controlled Baseline
- Power-sensitive applications
- Servers
