IDTQS3VH800QG
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Propagation Delay | 8 ns |
| Quiescent Current | 4mA |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 30mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Packaging | Rail/Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Number of Terminations | 24 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
IDTQS3VH800QG Overview
As a means of saving space, digital switch is provided in the QSOP.Rail/Tube is the method used for packaging.The basic configuration of this system includes 24 terminations.The multiplexer's system works with 2.5V voltage.This turn signal switch contains 24 component pins.As a result, conductors end at GULL WING.Its supply type is Single, which is used as the source of power.The board has 24 pins configured.It is mounted in the way of Surface Mount.The logic switch is a member of the family of CB3Q/3VH/3C/2B.In the signal multiplexer, there are 10 bits available.In the absence of external influences, it consumes 4mA current of multiplexer ic.The resistance of the signal switching is 2.Signal switch operation at 85°C temperature is acceptable.Ideally, the temperature of the multiplexer should not exceed -40°C.Device specifications specify 3.6V as the maximum supply voltage for the signal switches.The digital swith is specified to operate at the minimum supply voltage of 2.3V in compliance with the applicable device specification.For its logic, IC BUS DRIVER is used.
IDTQS3VH800QG Features
Supplied in the QSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
IDTQS3VH800QG Applications
There are a lot of Integrated Device Technology (IDT) IDTQS3VH800QG Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Robotic vehicles
- Code converters
- Combinational circuit
- Frequency multiplexing system
- Transmission from the computer system of a satellite
- To select different devices in microprocessor output
- Home automation system
- PCIe
- VGA
