IFX9201SGAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BSOP (0.295, 7.50mm Width) Exposed Pad |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| Applications | DC Motors, General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Channels | 2 |
| Interface | PWM, SPI |
| Output Configuration | Half Bridge (2) |
| Output Current | 6A |
| Halogen Free | Halogen Free |
| Output Current per Channel | 6A |
| Voltage - Load | 5V~36V |
| Fault Protection | Current Limiting, Open Load Detect, Over Temperature, Short Circuit, UVLO |
| Output Peak Current Limit-Nom | 8A |
| Rds On (Typ) | 100m Ω LS, 100m Ω HS |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Load Type | Inductive |
| Length | 7.5mm |
| Width | 6.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
IFX9201SGAUMA1 Description
The IFX9201SGAUMA1 is a 6 A H-Bridge with a general purpose design for controlling DC motors and other inductive loads.
At frequencies up to 20kHz, the outputs of IFX9201SGAUMA1 can be pulse width modulated. On the microcontroller side, PWM/DIR control minimizes the number of PWM capable pins required.
IFX9201SGAUMA1 Features
? Chopper current limitation
? Low standby current
? Short circuit shut down with latch behavior
? Overtemperature shut down with latch behavior
? VS undervoltage shutdown
? RDSon of 100 mΩ per switch typ. at Tj=25 °C
? Logic inputs 3.3 V and 5.0 V TTL/CMOS-compatible
? Open load detection in ON and OFF state
? Detailed SPI diagnosis or simple error flag
? Green product (RoHS compliant)
? RDSon (typ.) < 100mΩ per switch
? Operation Voltage 4.5V to 36 V
? Logic inputs: 3.3-V and 5-V TTL/ 5-V CMOS compatible
? Low standby current
? Short circuit and over-temperature protection
? VS under-voltage protection
? Open load detection in ON and OFF state
? Detailed SPI diagnosis or simple error flag
? Green product (RoHS compliant)
IFX9201SGAUMA1 Applications
? As motor driver circuit
? In Robotics Technology
? Used as Invertecircuitut.
? In modern battery charger for electrical vehicles
? DC motor control for industrial applications
? Home and building automation
? Power tools battery management
? Industrial robotic
? Medical applications
The IFX9201SGAUMA1 is a 6 A H-Bridge with a general purpose design for controlling DC motors and other inductive loads.
At frequencies up to 20kHz, the outputs of IFX9201SGAUMA1 can be pulse width modulated. On the microcontroller side, PWM/DIR control minimizes the number of PWM capable pins required.
IFX9201SGAUMA1 Features
? Chopper current limitation
? Low standby current
? Short circuit shut down with latch behavior
? Overtemperature shut down with latch behavior
? VS undervoltage shutdown
? RDSon of 100 mΩ per switch typ. at Tj=25 °C
? Logic inputs 3.3 V and 5.0 V TTL/CMOS-compatible
? Open load detection in ON and OFF state
? Detailed SPI diagnosis or simple error flag
? Green product (RoHS compliant)
? RDSon (typ.) < 100mΩ per switch
? Operation Voltage 4.5V to 36 V
? Logic inputs: 3.3-V and 5-V TTL/ 5-V CMOS compatible
? Low standby current
? Short circuit and over-temperature protection
? VS under-voltage protection
? Open load detection in ON and OFF state
? Detailed SPI diagnosis or simple error flag
? Green product (RoHS compliant)
IFX9201SGAUMA1 Applications
? As motor driver circuit
? In Robotics Technology
? Used as Invertecircuitut.
? In modern battery charger for electrical vehicles
? DC motor control for industrial applications
? Home and building automation
? Power tools battery management
? Industrial robotic
? Medical applications
