IH5043CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IH5043 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 18V |
| Power Supplies | 5+-15V |
| Number of Channels | 2 |
| Turn On Delay Time | 400 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 80Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 19.175mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IH5043CPE+ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to 0°C~70°C TA. There are 16 terminations totally. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. The electronic part body is injected with 16 pins. SPDT switching circuits are used in these analog switch ics. Using the IH5043 search parameter, you can discover variants of the switch. This digital multiplexer has 80Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A cost-effective Dual supply type analogue multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. You should attach at least 4.5V voltage if you are using dual power supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The electronic component can function from 18V.
IH5043CPE+ Features
2 Channels
Switch Circuit: SPDT
IH5043CPE+ Applications
There are a lot of Maxim Integrated IH5043CPE+ Analog Switches & Multiplexers ICs applications.
- Avionics
- New designs requiring multiplexer functions
- Medical Instrumentation
- Cable PC
- USB 1.1 signal switching circuits
- Residential Gateways, Home Gateway/Router
- High reliability control systems
- DSUs
- Automatic test equipment
- DVD-R
