IH5043CWE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | IH5043 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Max Supply Current | 10μA |
| Turn On Delay Time | 400 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 80Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IH5043CWE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.295, 7.50mm Width). The advanced packaging method Tube provides high reliability. The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 2 channels. A 15V voltage supply should turn on and run the electronic component. The electronic part body is injected with 16 pins. Multiplexers built on a SPDT switching circuit are built. Try searching with IH5043 to find analog multiplexer variants. There is 80Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. It is a typical Multiplexer or Switches analog multiplexer. Analog switch ics with Dual supply type are cost-effective. It may damage the digital multiplexer if the voltage is higher than 10μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. You should attach at least 4.5V voltage if you are using dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. The electrical part can be operated at 15V voltage levels.
IH5043CWE Features
2 Channels
Switch Circuit: SPDT
IH5043CWE Applications
There are a lot of Maxim Integrated IH5043CWE Analog Switches & Multiplexers ICs applications.
- PBXs
- T1/E1 Terminals
- Cell phones
- PCMCIA cards
- PDH Multiplexers
- Communication systems
- Power routing
- Industrial control systems
- Transmit
- Cellular phones
