banner_page

IH5043MJE/883B

400ns, 200ns SPDT 75Ohm DUAL Analog Switches 16 Pins 1nA 15V 16-CDIP (0.300, 7.62mm)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-IH5043MJE/883B
  • Package: 16-CDIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 252
  • Description: 400ns, 200ns SPDT 75Ohm DUAL Analog Switches 16 Pins 1nA 15V 16-CDIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 16-CDIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature -55°C~125°C TA
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish TIN LEAD
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 240
Number of Functions 2
Supply Voltage 15V
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 16
JESD-30 Code R-GDIP-T16
Qualification Status Not Qualified
Supply Voltage-Min (Vsup) 4.5V
Number of Channels 1
Number of Circuits 2
Neg Supply Voltage-Nom (Vsup) -15V
On-State Resistance (Max) 75Ohm
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 54 dB
Neg Supply Voltage-Max (Vsup) -18V
Current - Leakage (IS(off)) (Max) 1nA
On-state Resistance Match-Nom 3Ohm
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 400ns, 200ns
Channel-to-Channel Matching (ΔRon) 3 Ω
Switch-on Time-Max 400ns
Neg Supply Voltage-Min (Vsup) -4.5V
Voltage - Supply, Dual (V±) ±4.5V~18V
Height Seated (Max) 5.08mm
RoHS Status Non-RoHS Compliant

IH5043MJE/883B Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-CDIP (0.300, 7.62mm). Mounted in Through Hole is this multiplexer. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C TA. Totally, there are 16 terminations. A 1 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. It is part of the design of the 16 series that this electronic component is included. A SPDT switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. Providing power to the analogue multiplexer requires a voltage of 4.5VV.

IH5043MJE/883B Features


1 Channels
Switch Circuit: SPDT

IH5043MJE/883B Applications


There are a lot of Maxim Integrated IH5043MJE/883B Analog Switches & Multiplexers ICs applications.

  • Video switching
  • Power routing
  • Medical systems
  • Data Acquisition Systems
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • CSU
  • Central office
  • Audio/video switches
  • Automatic test equipment
  • Optical Applications

Write a review

Note: HTML is not translated!
    Bad           Good