IH5045CPE
| Parameters | |
|---|---|
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | IH5045 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 80Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 5nA |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Normal Position | NO |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
IH5045CPE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. It is mounted in the position Through Hole. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature extended to 0°C~70°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 2 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. It is injected into the electrical part body with 16 pins. On the other hand, analog switches can be constructed using DPST - NO switching circuits. This multiplexer is composed of 2 circuits. Using the IH5045 search parameter, you can discover variants of the switch. It is a typical Multiplexer or Switches analog multiplexer. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. To power the multiplexer ics, the voltage must be set at 4.5V.
IH5045CPE Features
2 Channels
Switch Circuit: DPST - NO
IH5045CPE Applications
There are a lot of Maxim Integrated IH5045CPE Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Fault Tolerant Systems
- Routers
- Video switching
- Audio signal routing
- 65 V DACs
- MP3 players
- Automatic test equipment
- PCMCIA cards
- SDH/SONET multiplexers
