IH5048ACPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 45Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | IH5048 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 600ns, 300ns (Typ) |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 600ns |
| Switch-off Time-Max | 300ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
IH5048ACPE Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexer and demultiplexer circuits have a number 1:1. Extended operating temperature around 0°C~70°C TA. 16 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. This multiplexer is composed of 2 circuits. If you are looking for variants of the digital switch, trying search with IH5048. Analog switches have 45Ohm internal resistance. Multiplexer or Switches is a typical switch device. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.
IH5048ACPE Features
1 Channels
Switch Circuit: SPST - NO
IH5048ACPE Applications
There are a lot of Maxim Integrated IH5048ACPE Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Battery Powered Instruments
- Wireless Local Loop
- Data switching
- Communication systems
- Audio and video routing
- Isolation
- Ultrasound
- Automotive applications
- Fault Tolerant Systems
