IH5049MJE/883B
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 60Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | 5+-15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DPST |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 60Ohm |
| Min Dual Supply Voltage | 4.5V |
| Screening Level | MIL-STD-883 Class B |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 54 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns (Typ) |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
IH5049MJE/883B Overview
As the electronic part is packed in 16-CDIP (0.300, 7.62mm), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature extended to -55°C~125°C TA. There are 16 terminations totally. This electronic part offers high-quality output due to its 2 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. Based on SPST - NO switching circuits, these analog multiplexers work. It consists of 2 circuits. It has an internal resistance of 60Ohm. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. There is no problem with using dual supply voltage, but it should not exceed 20V. With dual power supplies, you should attach at least 4.5V. It is integrated with a DPST analog IC. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
IH5049MJE/883B Features
2 Channels
Switch Circuit: SPST - NO
IH5049MJE/883B Applications
There are a lot of Maxim Integrated IH5049MJE/883B Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Microprocessor Controlled Analog Systems
- DSUs
- MP3 players
- Isolation
- Audio and video routing
- DVD-R
- Communication systems
- Fiber In The Loop (FITL)
- Industrial control systems
