banner_page

IH5050CWE

600ns, 300ns (Typ) SPDT 75Ohm DUAL Analog Switches BREAK-BEFORE-MAKE IH5050 16 Pins 100nA 15V 16-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-IH5050CWE
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 159
  • Description: 600ns, 300ns (Typ) SPDT 75Ohm DUAL Analog Switches BREAK-BEFORE-MAKE IH5050 16 Pins 100nA 15V 16-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Surface Mount YES
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2003
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 75Ohm
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 15V
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number IH5050
Pin Count 16
Qualification Status Not Qualified
Number of Channels 1
Number of Circuits 1
Neg Supply Voltage-Nom (Vsup) -15V
On-State Resistance (Max) 75Ohm
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 50 dB
Current - Leakage (IS(off)) (Max) 100nA
On-state Resistance Match-Nom 8Ohm
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 600ns, 300ns (Typ)
Charge Injection 10pC
Channel-to-Channel Matching (ΔRon) 8 Ω
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 600ns
Switch-off Time-Max 300ns
Voltage - Supply, Dual (V±) ±4.5V~20V
Height Seated (Max) 2.65mm
Width 7.5mm
RoHS Status Non-RoHS Compliant

IH5050CWE Overview


The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.295, 7.50mm Width). In order to provide high reliability, an advanced packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Temperatures around 0°C~70°C TA are extended for operation. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. A 15V voltage supply should turn on and run the electronic component. As part of its design, the 16 series is equipped with this electronic component. A SPDT switching circuit is used for these analog switches. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with IH5050. Analog switches have 75Ohm internal resistance. In this analog multiplexer, the value is Multiplexer or Switches.

IH5050CWE Features


1 Channels
Switch Circuit: SPDT

IH5050CWE Applications


There are a lot of Maxim Integrated IH5050CWE Analog Switches & Multiplexers ICs applications.

  • Battery Powered Instruments
  • Audio signal routing
  • Cross Connects
  • Cell phones
  • PDAs
  • Precision test equipment
  • CSU
  • Digital access cross connects
  • PCMCIA cards
  • PBXs

Write a review

Note: HTML is not translated!
    Bad           Good