IH5051CPE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 45Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | IH5051 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Power Supplies | 5+-15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 10μA |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 75Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 600ns, 300ns (Typ) |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 600ns |
| Switch-off Time-Max | 300ns |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Length | 19.175mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IH5051CPE Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 2:1. Extended operating temperature around 0°C~70°C TA. Totally, there are 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPDT switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. Try searching with IH5051 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 45Ohm. It is a typical Multiplexer or Switches analog multiplexer. The digital multiplexer has a low cost Dual supply. The switch device would be able to operate with 10μA current. Despite this switch device's dual supply capability, its voltage should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.
IH5051CPE Features
1 Channels
Switch Circuit: SPDT
10μA Supply Current
IH5051CPE Applications
There are a lot of Maxim Integrated IH5051CPE Analog Switches & Multiplexers ICs applications.
- Power routing
- HDTV
- Audio and video switching
- Digital Cross-Connects
- Communication systems
- Microprocessor controlled systems
- Wireless Local Loop
- Ultrasound
- Industrial and process control systems
- Microprocessor Controlled Analog Systems
