IH5141CWE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | IH5141 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 125ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
IH5141CWE Overview
As the electronic part is packed in 16-SOIC (0.295, 7.50mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. There are 16 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. This multiplexer is composed of 2 circuits. Search with IH5141 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 100Ohm. There is a standard Multiplexer or Switches analogue multiplexer here. To supply the switch device, a voltage of 4.5V must be applied.
IH5141CWE Features
1 Channels
Switch Circuit: SPST - NO
IH5141CWE Applications
There are a lot of Maxim Integrated IH5141CWE Analog Switches & Multiplexers ICs applications.
- Routers
- Sample hold systems
- Frame Relay Equipment
- Communications systems
- Microprocessor controlled systems
- Data Acquisition Systems
- T1/E1 Terminals
- Multiplexers
- Modems
- Precision instrumentation
