IH5143CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| On-state Resistance Match-Nom | 30Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 150ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| RoHS Status | Non-RoHS Compliant |
IH5143CPE Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Through Hole. There is 2:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around 0°C~70°C TA. 16 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Circuits based on SPDT switching are used to construct these analog switch ics. The circuits in this analogue multiplexer number 2.
IH5143CPE Features
1 Channels
Switch Circuit: SPDT
IH5143CPE Applications
There are a lot of Rochester Electronics, LLC IH5143CPE Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- DSLAMs
- Audio signal routing
- Fiber to the Home
- Imaging
- PBX interfaces
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Avionics test equipment
- Power routing
