IH5145CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | IH5145 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 300ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
IH5145CPE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Through Hole. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature extended to 0°C~70°C TA. In total, there are 16 terminations. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. As part of its design, the 16 series is equipped with this electronic component. DPST - NO switching circuits are used in these analog switch ics. There are 2 circuits in this multiplexer. Use IH5145 to search for variants of the digital switches. The analog multiplexer shown here is a typical Multiplexer or Switches. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Providing power to the analogue multiplexer requires a voltage of 4.5VV.
IH5145CPE Features
2 Channels
Switch Circuit: DPST - NO
IH5145CPE Applications
There are a lot of Maxim Integrated IH5145CPE Analog Switches & Multiplexers ICs applications.
- Power routing
- Imaging
- Relay replacements
- Remote Powered Equipment
- Central office
- E1 Network Equipment
- HDTV
- PDH Multiplexers
- Battery Powered Systems
- DSLAMs
