INA101AG
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Max Power Dissipation | 600mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | INA101 |
| Pin Count | 14 |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 6.7mA |
| Nominal Supply Current | 6.7mA |
| Power Dissipation | 600mW |
| Quiescent Current | 6.7mA |
| Slew Rate | 0.4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | ±5V~20V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 300 kHz |
| Gain Bandwidth Product | 300 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 25μV |
| Gain | 1000 dB |
| -3db Bandwidth | 0.3MHz |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.002% |
| Height | 4.45mm |
| Length | 18.55mm |
| Width | 7.49mm |
| Thickness | 2.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA101AG Overview
In order to protect the op amps, a 14-CDIP (0.300, 7.62mm) case is used. Buffer amps of this type are called Instrumentation-types. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 14 terminations over the past year. In total, there are 14 pins on this op amp ic. Please take in mind that op amp should be run at 15V. In total, the buffer amplifier consists of 14 pins. The input offset voltage is 50μV. This electronic part is recommended for mounting type Through Hole. The buffer amplifier functions well at -25°C~85°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 6.7mA . Maintain 60dB as the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. A voltage rating of 3 is indicated for the op amp's operating supply voltage. The quiescent current is 6.7mA. 10GOhm is the range in which the op amp resistance should lie.
INA101AG Features
14 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm
INA101AG Applications
There are a lot of Texas Instruments INA101AG Instrumentational OP Amps applications.
- Polarized electrodes
- Power transmission
- earphone
- Medical instruments
- Signal transformation
- Tablets
- Information processing
- Automotive sensors
- Industrial applications including automation
- MP3
