INA101HP
| Parameters | |
|---|---|
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 600mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | INA101 |
| Pin Count | 14 |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 6.7mA |
| Nominal Supply Current | 8.5mA |
| Power Dissipation | 600mW |
| Output Current | 10mA |
| Quiescent Current | 6.7mA |
| Slew Rate | 0.4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | ±5V~20V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 300 kHz |
| Gain Bandwidth Product | 300 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 125μV |
| Gain | 1000 dB |
| -3db Bandwidth | 0.3MHz |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.002% |
| Height | 5.08mm |
INA101HP Overview
There is a 14-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. A Instrumentation-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. A total of 14 terminations have been reported in the past few weeks. In this case, there are 14 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 14-pin op amp ic is included in the package. The input offset voltage is 250μV. For this electrical component, Through Hole is the recommended mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. Operational amplifier can operate supply current at 6.7mA. It is recommended to keep the voltage gain at 60dB at all times. Buffer op amp is equipped with 1 channels on the device. There are a total of 3 elements in this linear amplifier. There is a quiescent current of 6.7mA in this operational amplifier circuit. Instrumentation amplifier resistance should remain within the range of 10GOhm.
INA101HP Features
14 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm
INA101HP Applications
There are a lot of Texas Instruments INA101HP Instrumentational OP Amps applications.
- Oscilloscopes
- Digital cameras
- Radar
- Video data acquisition
- Voltage regulation circuit
- Micro signal measurement
- Communication
- Mobile phone
- Professional videography
- Radiation thermometry transducers
