INA101HPG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 600mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | INA101 |
| Pin Count | 14 |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 6.7mA |
| Nominal Supply Current | 8.5mA |
| Power Dissipation | 600mW |
| Output Current | 10mA |
| Quiescent Current | 6.7mA |
| Slew Rate | 0.4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | ±5V~20V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 300 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Supply Voltage Limit-Max | 20V |
| -3db Bandwidth | 0.3MHz |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.002% |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA101HPG4 Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. An op amp of this type is a Instrumentation-type. The op amp is delivered to you in a Tube case. There have been a total of 14 terminations over the past year. It consists of a total of 14 pins in total. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In total, the buffer amplifier consists of 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 125μV. For this electronic part, it is recommended that you mount it with type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . Using a supply current of 6.7mA , this buffer op amp will be able to operate. You should keep the voltage gain at 60dB for the time being. The buffer amp consists of 1 circuits in total. The buffer op amp is rated for an operating voltage of 3 when it comes to the power supply. The current is quiescent at 6.7mA. 10GOhm should be the range of resistance for the instrumentation amplifier.
INA101HPG4 Features
14 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm
INA101HPG4 Applications
There are a lot of Texas Instruments INA101HPG4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Subtraction operation circuits
- Wireless base stations
- Fission chambers
- Automation control systems
- Test and measurement instruments
- Multiplication circuits
- Inverse/same-phase proportional circuit
- Logarithmic operation circuits
- pH (acidity)
