INA101SM
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Operating Supply Current | 6.7mA |
| Power Dissipation | 600mW |
| Quiescent Current | 6.7mA |
| Slew Rate | 0.4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | ±5V~20V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 25MHz |
| Gain Bandwidth Product | 300 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 10μV |
| -3db Bandwidth | 0.3MHz |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.002% |
| Height | 5.72mm |
| Length | 8.96mm |
| Width | 8.96mm |
| Thickness | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Surface Mount | NO |
| Number of Pins | 10 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Max Power Dissipation | 600mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.92mm |
| Base Part Number | INA101 |
| Pin Count | 10 |
| Number of Elements | 3 |
INA101SM Overview
The linear amplifier is packaged in a TO-100-10 Metal Can case which makes it easy for the consumer to handle. Op amps are Instrumentation types of amplifier on the chip. Linear amplifier is delivered in a Tube case. It is estimated that there will be 10 terminations in the next few months. Linear amplifier has a total of 10 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. 10 pins are included on the operational amplifiers. There is an input offset voltage of 25μV for this buffer op amp. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -55°C~125°C. The buffer amplifier is capable of operating from a supply current of 6.7mA . 60dB should remain the voltage gain. There are a total of 1 channels available on the op amps. There is an operating supply voltage rating of 3 for this operational amplifier, which is rated at the manufacturer. Currently, linear amplifier is operating with a quiescent current of 6.7mA. During testing, the instrumentation amplifier resistance should remain within a range of 10GOhm.
INA101SM Features
10 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm
INA101SM Applications
There are a lot of Texas Instruments INA101SM Instrumentational OP Amps applications.
- Car stereo
- Portable docking station
- Signal transformation
- Video conversion and routing
- PDA
- Mobile phone
- Video data acquisition
- Measurements of Wheatstone bridge
- single/dual op amp sum and difference circuits
- Television broadcasting equipment
