INA103KU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 60MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA103 |
| Pin Count | 16 |
| Operating Supply Voltage | 50V |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| Quiescent Current | 9mA |
| Slew Rate | 15V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | ±9V~25V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 6MHz |
| Gain Bandwidth Product | 6MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 8μA |
| Supply Voltage Limit-Max | 25V |
| Voltage - Input Offset | 30μV |
| Gain | 1000 dB |
| -3db Bandwidth | 6MHz |
| Dual Supply Voltage | 15V |
| Voltage Gain-Nom | 100 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA103KU Overview
A 16-SOIC (0.295, 7.50mm Width) case is used to package the op amp. Instrumentation-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 16. In this case, there are 16 pins on the board. This linear amplifier should be powered by an 15V battery. A total of 16 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 250μV. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. A supply current of 9mA can be used to operate this linear amplifier. The voltage gain should stay at 60dB. On the buffer amps, there are 1 channels that can be used. As a whole, there are 3 elements that make up this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 50V voltage. 9mA quiescent currents are flowing through buffer op amp. In order for the op amp resistance to remain within the 60MOhm range, the op amp should be tested.
INA103KU Features
16 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 60MOhm
INA103KU Applications
There are a lot of Texas Instruments INA103KU Instrumentational OP Amps applications.
- Video computer boards
- Multimedia playback equipment
- Commercial audio systems
- Ultrasound transducers
- Medical imaging
- Voltage regulation circuit
- Radar
- Division circuits
- Communication device
- Portable electronic products powered by batteries
