INA103KU/1K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 60MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA103 |
| Pin Count | 16 |
| Operating Supply Voltage | 50V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 12.5mA |
| Output Current | 40mA |
| Quiescent Current | 9mA |
| Slew Rate | 15V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | ±9V~25V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 6MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 8μA |
| Supply Voltage Limit-Max | 25V |
| Voltage - Input Offset | 30μV |
| -3db Bandwidth | 6MHz |
| Dual Supply Voltage | 15V |
| Voltage Gain-Nom | 100 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA103KU/1K Overview
A 16-SOIC (0.295, 7.50mm Width) case is used to package the op amp. This is a Instrumentation type op amp. A Tape & Reel (TR) case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 16. It consists of a total of 16 pins in total. Please take in mind that this instrumentation amplifier should be run at 15V. There are 16 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 250μV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Using a supply current of 9mA , this buffer op amp will be able to operate. 60dB should be the voltage gain. This op amp ic has 1 circuits. It is possible to count 3 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 50V voltage. This linear amplifier pack is based on the TR axis. There is an 9mA quiescent current running through op amp ic. Instrumentation amplifier resistance should remain within the range of 60MOhm.
INA103KU/1K Features
16 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 60MOhm
INA103KU/1K Applications
There are a lot of Texas Instruments INA103KU/1K Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- Television broadcasting equipment
- earphone
- Radiation thermometry transducers
- E-book readers
- Video amplifiers
- Navigation
- Polarized electrodes
- Hand-held batteries
- Power control
