INA115BUG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA115 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| Quiescent Current | 2.2mA |
| Slew Rate | 0.6V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| -3db Bandwidth | 1MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.002μA |
| Input Voltage Noise Density | 11nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Height | 2.35mm |
| Length | 10.28mm |
| Width | 7.52mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA115BUG4 Overview
It is packaged in an 16-SOIC (0.295, 7.50mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the Instrumentation type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 16. There are a total of 16 pins on this op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. The buffer op amp includes 16 pins. Regarding input offset voltage, op amp rates 10μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 2.2mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 80dB. A linear amplifier like this has 1 circuits on it. For the operating supply voltage of the op amp ic, there is a rating of 3. There is an 2.2mA quiescent current in linear amplifier. Instrumentation amplifier resistance should remain within the range of 10GOhm.
INA115BUG4 Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA115BUG4 Applications
There are a lot of Texas Instruments INA115BUG4 Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Fission chambers
- High speed sample
- Signal transformation
- Home audio systems
- Division circuits
- Non-polarized electrodes
- Communication device
- Video conversion and routing
- Proportional operation circuits
