INA116PA
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | Difet® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | INA116 |
| Pin Count | 16 |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.4mA |
| Max Supply Current | 1.4mA |
| Quiescent Current | 1mA |
| Slew Rate | 0.8V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.003pA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 800 kHz |
| Gain Bandwidth Product | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Voltage - Input Offset | 500μV |
| Gain | 1000 dB |
| -3db Bandwidth | 0.8MHz |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 28nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA116PA Overview
The linear amplifier is packaged in a 16-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. It is estimated that there will be 16 terminations in the next few months. A total of 16 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 15V volts. Linear amplifier includes 16 pins. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. Through Hole is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 1mA . There should be no change in the voltage gain at 60dB. The op amp ic has 1 channels on it. The linear amplifier consists of 3 different elements in total. The Difet? represents the op amp's series number. As a result, linear amplifier's quiescent current is 1mA.
INA116PA Features
16 Pins
supply voltage of 15V
60dB voltage gain
INA116PA Applications
There are a lot of Texas Instruments INA116PA Instrumentational OP Amps applications.
- Comparator
- Industrial control system
- Video amplifiers
- Test and measurement instruments
- Automotive sensors
- Cinema or auditorium audio system
- RF cable systems
- Subtraction operation circuits
- Weak signal detection
- Displayers for aircraft and air transportation control systems
