Parameters |
Frequency Compensation |
NO |
Supply Voltage Limit-Max |
22V |
Voltage - Input Offset |
120μV |
Micropower |
NO |
-3db Bandwidth |
0.2MHz |
Programmable Power |
NO |
Dual Supply Voltage |
15V |
Neg Supply Voltage-Max (Vsup) |
-22V |
Power |
NO |
Voltage Gain-Nom |
1 |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Weight |
528.605208mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
Through Hole |
ECCN Code |
EAR99 |
Resistance |
800kOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
2.54mm |
Base Part Number |
INA117 |
Pin Count |
8 |
Number of Channels |
1 |
Operating Supply Current |
1.5mA |
Nominal Supply Current |
1.5mA |
Quiescent Current |
2mA |
Slew Rate |
2.6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Differential |
Common Mode Rejection Ratio |
70 dB |
Max Input Voltage |
200V |
Voltage - Supply, Single/Dual (±) |
±5V~18V |
Output Current per Channel |
20mA |
Supply Type |
Dual |
Input Offset Voltage (Vos) |
1mV |
Bandwidth |
200 kHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Voltage Gain |
0dB |
Low-Offset |
YES |
INA117P Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. A Tube case is used for delivering the op amp. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. This electronic component is recommended to be mounted using the mounting type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using an 1.5mA supply current, this operational amplifier ics can be operated. It is a member of the 0dB's 0dB family. Instrumentation amplifier has 1 channels on it. The current is quiescent at 2mA. Linear amplifier resistance should stay within the range of 800kOhm.
INA117P Features
8 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 800kOhm
INA117P Applications
There are a lot of Texas Instruments INA117P Instrumentational OP Amps applications.
- Image computer boards
- Tablets
- pH (acidity)
- Fission chambers
- Logarithmic operation circuits
- Navigation
- Automatic control
- Precision measurement
- Proportional operation circuits
- Inverse/same-phase proportional circuit